Brilliant Effects.
Made in Germany.
Product information
A brilliant product
FISCHER JETplast® has a gentle impact to surfaces without penetrating them – a big advantage compared to standard abrasive blasting media. In order to ensure this gentle blasting effect only fully hardened thermoset moulding compounds filled with cellulose are processed.
FISCHER JETplast® is applied worldwide successfully in many applications in different branches for: cleaning and activating surfaces, depainting, deflashing and preparation of surfaces for high quality painting. Always gentle and effective for brilliant results.
A product with best references!
TYPE A
TYPE II
TYPE III
TYPE V
TYPE PA6
TYPE PC
Plastics consists of
(UREA + MELAMINE + PHENOL, without antistatic)
Industry-standard
(UREA + antistatic)
Certified by the U.S. Air Force by MIL-P-85891, MIL-P-85891A, MIL-DTL-85891B
(MELAMIN + antistatic)
Certified by the U.S. Air Force by MIL-P-85891, MIL-P-85891A, MIL-DTL-85891B
(ACRYLIC + antistatic)
Certified by the U.S. Air Force by MIL-P-85891, MIL-P-85891A, MIL-DTL-85891B
(POLYAMID) Deflashing of thermoset parts
cylindrical / cubical
(POLYCARBONAT) Cryogen-Deflashing of rubber molded parts
cylindrical / cubical
Plastic blast media
TYPE A
(UREA + MELAMINE + PHENOL, without antistatic)
Industry-standard
TYPE II
(UREA + antistatic)
Certified by the U.S. Air Force by MIL-P-85891, MIL-P-85891A, MIL-DTL-85891B
TYPE III
(MELAMIN + antistatic)
Certified by the U.S. Air Force by MIL-P-85891, MIL-P-85891A, MIL-DTL-85891B
TYPE V
(ACRYLIC + antistatic)
Certified by the U.S. Air Force by MIL-P-85891, MIL-P-85891A, MIL-DTL-85891B
TYPE PA6
(POLYAMID) Deflashing of thermoset parts
cylindrical / cubical
TYPE PC
(POLYCARBONAT) Cryogen-Deflashing of rubber molded parts
cylindrical / cubical
Plastic blast media “Standard”
Type A
TYPE A is made of sprue and not fully hardened UREA-, MELAMIN- and PHENOL-moulding parts. This is a cost-efficient alternative to the PBM-types described below.
Plastic consists of
Colour
Delivery Details
PE-bags : 25 kg / bag
Fiber-Drums : 50 kg / Drum u./o. 125 kg / Drum
max. packed on owp : 1000 kg
Big-Bag: max. 1000 kg
Certifications and approvals
Property
Physical Properties
hardness Mohs/ HRR : 3,0 – 4,0 Mohs
spec. weight (gr./cm3) : 1,45 – 1,52
weight of bulk goods (gr./ltr.) : 700 – 800
ignition temperature: > 500°C
Standard-Sizes
0,6 – 1,0 mm
1,0 – 1,6 mm
Special Sizes on request
Applications
Plastic blast media with MIL-Specification
MIL-P-85891, MIL-P-85891A and MIL-DTL-85891B
Type II
TYPE II is made of fully (100 %) hardened UREA moulding parts. In further workflows it will filtered according to American standard mesh-sizes and moistened with a special anti-static agent. Type II have been certified by the U.S. Air Force according to MIL-P-85891, MIL-P-85891A and MIL-DTL-85891B and can be used for cleaning and paint stripping of surfaces in the aircraft industry and the military sector.
Plastic consists of
Colour
Delivery Details
PE-bags: 25 kg / bag
Fiber-Drums: 50 kg / Drum u./o. 125 kg / Drum
max. packed on owp: 1000 kg
Big-Bag: max. 1000 kg
Certifications and approvals
Property
Physical Properties
Hardness Mohs: 3,5 Mohs spec. weight (gr./cm3): 1,45 – 1,52 weight of bulk goods (gr./ltr.): 700 – 800
ignition temperature: > 500°C
Standard-Sizes
60 – 80 mesh 0,18 – 0,25 mm
40 – 60 mesh 0,25 – 0,40 mm
30 – 60 mesh 0,25 – 0,60 mm
30 – 40 mesh 0,40 – 0,60 mm
20 – 40 mesh 0,40 – 0,80 mm
20 – 30 mesh 0,60 – 0,80 mm
16 – 20 mesh 0,80 – 1,20 mm
12 – 20 mesh 0,80 – 1,70 mm
12 – 16 mesh 1,20 – 1,70 mm
8 – 16 mesh 1,20 – 2,38 mm
6 – 16 mesh 1,10 – 3,15 mm
Special Sizes on request
Applications
Type III
TYPE III is made of fully (100 %) hardened MELAMINE moulding parts. In further workflows it will filtered according to American standard mesh-sizes and moistened with a special anti-static agent. Due to the higher hardness compared to Type II it can achieve a higher blast media efficiency. The abrasive consumption is approx. 20 % less compared to the Type II. Type III have been certified by the U.S. Air Force according to MIL-P-85891, MIL-P-85891A and MIL-DTL-85891B and can be used for cleaning and paint stripping of surfaces in the aircraft industry and the military sector.
Plastic consists of
Colour
Delivery Details
PE-bags: 25 kg / bag
Fiber-Drums: 50 kg / Drum u./o. 125 kg / Drum
max. packed on owp: 1000 kg
Big-Bag: max. 1000 kg
Certifications and approvals
Property
Physical Properties
hardness Mohs/ HRR: 3,5 – 4,0 Mohs
spec. weight (gr./cm3): 1,45 – 1,52 weight of bulk goods (gr./ltr.): 700 – 800
ignition temperature : > 500°C
Standard-Sizes
40 – 60 mesh 0,25 – 0,40 mm
30 – 60 mesh 0,25 – 0,60 mm
30 – 40 mesh 0,40 – 0,60 mm
20 – 40 mesh 0,40 – 0,80 mm
20 – 30 mesh 0,60 – 0,80 mm
16 – 20 mesh 0,80 – 1,20 mm
12 – 20 mesh 0,80 – 1,70 mm
12 – 16 mesh 1,20 – 1,70 mm
Special Sizes on request
Applications
Type V
TYPE V is made of fully (100 %) hardened ACRYLIC parts. In further workflows it will filtered according to American standard mesh-sizes and moistened with a special anti-static agent. It’s suitable for the shot blasting of soft/thin nonferrous metals and composite parts. The Type V doesn’t produce any harshness on soft metals and galvanic coatings with an approx. 10 % higher stripping rate compared to the Type II. The consumption of blasting media is approx. 50 % less than Type II. Type V have been certified by the U.S. Air Force according to MIL-P-85891, MIL-P-85891A and MIL-DTL-85891B and can be used for cleaning and paint stripping of surfaces in the aircraft industry and the military sector.
Plastic consists of
Colour
Delivery Details
PE-bags: 20kg + 25kg/bag Fiber-Drums: 100 kg +125 kg / Drum max. packed on owp: 1000kg
Big-Bag: max. 1000 kg
Certifications and approvals
Property
Physical Properties
hardness Mohs/ HRR: 3,0 – 3,5 Mohs spec. weight (gr./cm3): 1,10 – 1,20
weight of bulk goods (gr./ltr.) : 550 – 650
ignition temperature: > 100 °C
Standard-Sizes
40 – 60 mesh 0,25 – 0,40 mm
30 – 60 mesh 0,25 – 0,60 mm
30 – 40 mesh 0,40 – 0,60 mm
20 – 40 mesh 0,40 – 0,80 mm
20 – 30 mesh 0,60 – 0,80 mm
16 – 20 mesh 0,80 – 1,20 mm
12 – 20 mesh 0,80 – 1,70 mm
12 – 16 mesh 1,20 – 1,70 mm
Special Sizes on request
Applications
Plastic blast media for deflashing
Type PA6
TYPE PA6 is used for deflashing of thermoset parts. Due to its high elasticity, an intact surface is guaranted. Low friction on the grit ensures dust-free surfaces without costly rework.
Plastic consists of
Colour
Delivery Details
Fiber-Drums: –
max. packed on owp: 675 kg
Certifications and approvals
Property
Physical Properties
spec. weight (gr./cm3): 1,12 – 1,14
weight of bulk goods (gr./ltr.) : 680
ignition temperature : > 215 °C
Standard-Sizes
0,75 x 0,75 mm
1,00 x 1,00 mm
1,50 x 1,50 mm
Special sizes on request
Applications
Type PC
TYPE PC is used for deflashing of rubber parts. Rubber parts will usually be deburred between -20°C and -140°C. Type PC has the ideal characteristics to achieve optimum results even when deflashing at low temperatures. An expensive reworking of the surface is omitted.
Plastic consists of
Colour
Delivery Details
PE-bags: 25 kg / cardboard box
Fiber-Drums: –
max. packed on owp: 675 kg
Certifications and approvals
Property
Physical Properties
spec. weight (gr./cm3): 1,20
weight of bulk goods (gr./ltr.) : 700 – 740
ignition temperature : > 150 °C
Standard-Sizes
0,75 x 0,75 mm
1,00 x 1,00 mm
1,50 x 1,50 mm
Special sizes on request