Product information

A brilliant product

 

FISCHER JETplast® has a gentle impact to surfaces without penetrating them – a big advantage compared to standard abrasive blasting media. In order to ensure this gentle blasting effect only fully hardened thermoset moulding compounds filled with cellulose are processed.

FISCHER JETplast® is applied worldwide successfully in many applications in different branches for: cleaning and activating surfaces, depainting, deflashing and preparation of surfaces for high quality painting. Always gentle and effective for brilliant results.

A product with best references!

plastic blast media “standard”

Type A is made of sprue and not fully hardened UREA-, MELAMIN- and PHENOL-moulding parts. This is a cost-efficient alternative to the PBM-types described below.
Additional information on request.

plastic blast media with MIL-Specification MIL-P-85891

Type II is made of fully (100 %) hardened UREA moulding parts. In further workflows it will filtered according to American standard mesh-sizes and moistened with a special anti-static agent. Type II have been certified by the U.S. Air Force according to MIL-P-85891 and can be used for cleaning and paint stripping of surfaces in the aircraft industry and the military sector.
Many other approvals on request.

Type III is made of fully (100 %) hardened MELAMIN moulding parts. In further workflows it will filtered according to American standard mesh-sizes and moistened with a special anti-static agent. Due to the higher hardness compared to Type II it can achieve a higher blast media efficiency. The abrasive consumption is approx. 20 % less compared to the Type II. Type III have been certified by the U.S. Air Force according to MIL-P-85891 and can be used for cleaning and paint stripping of surfaces in the aircraft industry and the military sector.
Many other approvals on request.

Type V is made of fully (100 %) hardened ACRYLIC parts. In further workflows it will filtered according to American standard mesh-sizes and moistened with a special anti-static agent. It’s suitable for the shot blasting of soft/thin nonferrous metals and composite parts. The Type V doesn’t produce any harshness on soft metals and galvanic coatings with an approx. 10 % higher stripping rate compared to the Type II. The consumption of blasting media is approx. 50 % less than Type II. Type V have been certified by the U.S. Air Force according to MIL-P-85891 and can be used for cleaning and paint stripping of surfaces in the aircraft industry and the military sector.
Many other approvals on request.

plastic blast media for deflashing

Type PA6 is used for deflashing of thermoset parts. Due to its high elasticity, an intact surface is guaranted. Low friction on the grit ensures dust-free surfaces without costly rework.

Type PC is used for deflashing of rubber parts. Rubber parts will usually be deburred between -20°C and -140°C. Type PC has the ideal characteristics to achieve optimum results even when deflashing at low temperatures. An expensive reworking of the surface is omitted.